Siemens Simotion A4027118-A0414 User Manual page 70

Flying Saw with SIMOTION
EndSyncPos [mm]
EndPos [mm]
ToStartposVelocity [mm/s]
ToBackposVelocity [mm/s]
AccelerationCut [mm/s²]
AccelerationBack [mm/s²]
AccelerationGap [mm/s²]
GearingRatio
CutEverySensorSignal
GapLength
GapVelocity
V 1.4
Section C: Integrating the core "flying saw" functions
Parameter
Release 06/06/08
Program environment and interfaces
Data type Initial
value
LREAL 20.0
LREAL 125.0
LREAL 100.0
LREAL 150.0
LREAL 100.0
LREAL 100.0
LREAL 100.0
LREAL 1.0
DINT 1
LREAL 10.0
LREAL 50.0
A4027118-A0414
Description
End position of the
synchronous range
Starting position of the
cross-cutter
Velocity of the travel
back to the starting
position
Velocity of the travel
back to the starting
position
Acceleration value for
synchronization motion
Acceleration value for
return motion to the
starting position
Acceleration value for
motion to create a
"gap".
Ratio between
measured and
effective velocity of the
material web.
Specifies after how
many sensor signals a
synchronous position
is to be generated.
Length of the gap that
should be located
between the cut pieces
Higher-level velocity
with which the gap is
to be created
70/107