Table of Contents
Advertisement
Flying Saw with SIMOTION
Table 7-2 Software components
Software
STEP 7
SIMOTION
SCOUT
This form of the installation has been used when generating the standard
"flying saw" application and should therefore be the preferred one for users.
7.2.2
SIMOTION control
A SIMOTION control is required to operate the core "flying saw" functions.
All SIMOTION D, SIMOTION P and SIMOTION C controls can be used.
.
Note
The application example has been developed and tested for use in
conjunction with the SIMOTION D training case with CPU D435 .
Modifications and changes may have to be made when used in another
hardware environment
.
In order to correctly use the program elements in this document, you should
be knowledgeable about handling, and programming the control being used
as well as its functions.
Table 7-3 Hardware components of the core "flying saw" functions
Hardware element
SIMOTION CPU
D435
SIMOTION
D435
32MB CF-Card
V 1.4
Section C: Integrating the core "flying saw" functions
Diagram
Order No./MLFB and functions
6ES7810-4CC07-0YA5
Step7 is the basis package for all
optional software packages and is used
to program the SIMATIC S7.
6AU1810-0BA40-0XA0
SCOUT is the engineering tool to
program all SIMOTION controls
Diagram
Release 06/06/08
Integrating the core "flying saw" functions
Order No./MLFB and functions
6AU1435-0AA00-0AA0 Version C
The CPU D435 processes the user
program, the technology and checks the
drives.
6AU1400-2JA00-0AA0
The SIMOTION program and the
SINAMICS configuring are saved on the
CF card.
A4027118-A0414
Version used
V5.3 SP3 HF1
V4.0.0
73/107
Advertisement
Table of Contents
