Table of Contents
Advertisement
Flying Saw with SIMOTION
3 The Ethernet interface IE2 (X130) of
SIMOTION D435 has, as standard, the
IP address 169.254.11.22.
Select "Use the following IP address"
and enter the IP address 169.254.11.23.
Enter 255.255.0.0 as "Subnet mask".
4 The address set above must be identical
to the address for the PG/PC. Check this
address by selecting the PG/PC
interface in Netpro and, if required,
modify this.
5 Acknowledge your changes by pressing
twice on OK.
4.4.5
Downloading the hardware configuration after a factory setting
To download the hardware configuration, please proceed as follows
Table 4-4: Downloading the hardware configuration after a factory setting
No.
1 Now go into the hardware configuration
and press the Download to target
module button
V 1.4
Section B: The application example as demonstration
Action
Release 06/06/08
I
t lli
th h d
A4027118-A0414
Comment
system
d
ft
36/107
Advertisement
Table of Contents
