Hot-Swap Hard Disk Drive Status Leds - Lenovo ThinkServer RD630 Hardware Maintenance Manual

Non-CRUs must be replaced only by trained service technicians.
The following table lists the major FRUs in your server and the CRU identification information. For a complete
listing of FRU information, such as FRU part numbers and supported server models, go to:
http:/www.lenovo.com/serviceparts-lookup
Notes:
• Before servicing a Lenovo product, ensure that you read and understand "Safety information" on page iii.
• Use only parts provided by Lenovo.
Cooling shroud
Diagnostic module
Front panel board
Heat sink
Hot-swap hard disk drive
Hot-swap hard disk drive backplane
Hot-swap redundant power supply
Memory module
Microprocessor
Optical drive (available in some models)
PCI card
Rack handles
Riser card assembly
System board
System board battery
System fan
ThinkServer Management Module Premium (available as an option)
ThinkServer RAID 500 Upgrade Key for Advanced RAID (available as an option)
ThinkServer RAID 700 Battery (available as an option)
ThinkServer Trusted Platform Module (available as an option)

Hot-swap hard disk drive status LEDs

Each hot-swap hard disk drive has two status LEDs on the front.
Figure 19. 3.5-inch hot-swap hard disk drive status LEDs
32
ThinkServer RD630 Hardware Maintenance Manual
FRU description
Self-service Optional-service
CRU CRU
Yes No
No Yes
No Yes
Yes No
Yes No
No Yes
Yes No
Yes No
No Yes
Yes No
Yes No
Yes No
Yes No
No No
Yes No
Yes No
Yes No
No Yes
No Yes
Yes No