Lenovo ThinkServer RD630 Hardware Maintenance Manual page 137
Machine types: 2577, 2579, 2592, 2593, 2594, and 2595
Hide thumbs
Also See for ThinkServer RD630:
- Benutzerhandbuch (210 pages) ,
- Hardware maintenance manual (208 pages) ,
- Manual d'utilisation (206 pages)
Table of Contents
Advertisement
10. Remove the new microprocessor from the protective cover that protects the gold contacts on the
bottom of the new microprocessor. Do not touch the pins on the microprocessor socket and the gold
contacts on the bottom of the new microprocessor.
Figure 82. Do not touch the pins
11. Note the orientation of the new microprocessor. Hold the new microprocessor by its edges and align
the notches
1
on it with the tabs
microprocessor straight down into the microprocessor socket.
Note: The small triangle
indicator. The new microprocessor is in the correct orientation when this indicator faces the beveled
corner
4
of the microprocessor socket.
Figure 83. Installing the microprocessor
2
in the microprocessor socket. Then, carefully lower the new
3
on one corner of the new microprocessor is the microprocessor orientation
.
Chapter 6
Installing, removing, or replacing hardware
123
Advertisement
Table of Contents
Troubleshooting
