Table of Contents
Advertisement
Installation
PARTS, TOOLS,
MATERIALS
THE FOLLOWING
PARTS ARE SUPPLIED WITH THE OVEN:
NOTE: Dependingon yourventilation requirements, y ou may not use all of these parts,
Backdraft damper / duct connector
(for roof-venting or wall-venting installation)D
Not Actual Size ( 2 pieces must bet1
assembled as shown )
One power cord clamp and
One dark-colored
mounting screw
(to hold the power cord)r"
Actual Size
Two self - tapping screws - Actual Size
(for attaching the damper duct connector)n
I
One lock pin and one washer-Not Actual size
One power cord clamp bushing - Actual Sized
(for the cord hole in a metal upper cabinet)
Four 1/4" x 2" lag screws - Actual Sized
(for wall stud holes)
Four 1/4" x 3" toggle bolts - Actual SizeO
(for drywall holes)
_
}liii}lllii l iililin niliilJillliilillliniillinlllnllnilllillnllllllllliliillllillit)
Two 1/4" x 2" or 3" bolts - Actual Sized
(for securing to the upper cabinet)
- ))i)IIJIIIII}IilIilIIItlIIIIIIIIUIIIIIIIIIIIIIlIIUI)IIIlIII}_IIU
)
Two washers - Actual Sizen
(for the two upper cabinet bolts)
Four spring toggle heads - Actual Sized
(for the toggle bolts)
NOTE: You need to install at least 2 lag screws into one 2" x 4" stud and four anchor bolts into the wall.
The mounting area must meet the 150 Ibs. weight requirement.
- 34 -
Hide quick links:
Advertisement
Table of Contents
