Lexicon 960L Owner's Manual Addendum page 15

960L
Figure 15: Text Editor
Note:
Use the Automation Session Setup
screen shown in Figure 16 (page 17) to
modify individual automation session
names.
NOTES
Pressing the NOTES soft button accesses a text
editor similar to that shown in Figure 15
(above). The text editor can be used to enter
notes about the currently selected session
bank.
Note:
The NOTES soft button is only available
when the BANK/CATEGORY control is
selected on the LARC2 display.
To enter notes about a session bank:
1. Follow the instructions on page 11 to
access the Automation Session Library
screen.
2. Press the >>OPTIONS soft button.
3. Follow the instructions on page 12 to use
the BANK/CATEGORY control to select the
session bank for which to enter notes.
4. Press the NOTES soft button.
Automation Package Addendum
5. Enter the new session bank notes using
one of the following methods:
• Type the notes on the external
keyboard attached to the LARC2.
• Use the arrow keys or the joystick on
the LARC2 to select the desired
character on the text editor, then
press the ENTER button on the LARC2
to enter that character. Repeat this
process until all notes have been
entered.
6. Save the new session bank notes using one
of the following methods:
• Locate the Enter button on the
external keyboard attached to the
LARC2, then press it twice.
• Use the arrow keys on the LARC2
to select the
bottom of the text editor, then press
the ENTER button on the LARC2.
Note:
Use the Automation Session Setup
screen shown in Figure 16 (page 17) to
enter individual automation session
notes.
@@@@ button at the
15