Lexicon 960L Owner's Manual Addendum page 12

Automation Package Addendum
Automation Session Library Screen
Controls
The Automation Session Library screen
features a BANK/CATEGORY control that can
be used to select session banks, and a SESSION
control that can be used to select individual
automation sessions within the selected bank.
To use the BANK/CATEGORY control:
1. Use the left and right arrow keys on the
LARC2 to select the BANK/CATEGORY
control on the LARC2 display.
2. Use the up and down arrow keys on the
LARC2 to select the desired session bank.
(The bank number can also be entered
directly using the numeric keypad on the
LARC2.)
To use the SESSION control:
1. Use the left and right arrow keys on the
LARC2 to select the SESSION control on
the LARC2 display.
2. Use the up and down arrow keys on the
LARC2 to select the desired automation
session. (The session number can also be
entered directly using the numeric keypad
on the LARC2.)
Loading an Existing Automation
Session
To load an existing automation session:
1. Follow the instructions on page 11 to
access the Automation Session Library
screen.
Figure 11: Automation Session Library Screen Options Soft Row (with SESSION Control Selected)
The screen options soft row displays as shown in Figure 11 when the SESSION control is selected on the LARC2 display.
Figure 12: Automation Session Library Screen Options Soft Row (with BANK/CATEGORY Control Selected)
The screen options soft row displays as shown in Figure 12 when the BANK/CATEGORY control is selected on the LARC2 display.
12
2. Follow the instructions in the previous
column to use the BANK/CATEGORY and
SESSION controls to select the automation
session to be loaded. The name of the
currently selected session will flash.
3. When the desired session is selected, press
the ENTER button on the LARC2 to load
the session.
Note:
When the automation session number is
entered directly, it is not necessary to
press the ENTER button on the LARC2 to
load the session. It will automatically
load when its number is entered.
Automation Session Library Screen
Options
Most Automation Session Library screen
functions can be accessed from the screen
options soft row shown in Figures 11 and 12
(below). Press the >>OPTIONS soft button on
the soft row at the bottom of the LARC2
display to open the screen options soft row.
Press the >>OPTIONS soft button again to
close the screen options soft row and open the
previously displayed soft row.
When the screen options soft row is open, the
arrows on the >>OPTIONS soft button point
to the left (<<OPTIONS). When the screen
options soft row is closed, the arrows on the
>>OPTIONS soft button point to the right.
Lexicon