Advertisement
Available languages
Available languages
Step 9: Attaching the Monitor Brackets to a TV with a curved back
If your TV has a curved back and requires either a M4 or M5 diameter bolt, thread a M4 x 30 (w) or a M5 x 30 (y) Bolt
through the appropriate Lock Washer (ee,ff), an M4/M5 Washer (dd), the Monitor Bracket (k,l), an M4/M5 Washer, a M4/
M5 Spacer (ii) and into the TV as seen in Detailed View A of Diagram 9. If you determined that your TV requires a Bolt
with a M6 or M8 Diameter, thread a M6 x 35 (aa) or a M8 x 40 (cc) Bolt through the appropriate Lock Washer (gg,hh), the
Monitor Bracket, a M6/M8 Spacer (jj) and into the TV as seen in Detailed View B of Diagram 9. The Monitor Brackets
should be vertically as close to the center of the TV as possible. Lightly tighten the knobs on the Monitor Brackets once they
are properly connected to the TV.
Diagram 9
knob
Step 10:
If your TV has threaded inserts that are recessed and requires either a M4 or M5 diameter bolt, thread a M4 x 30 (w) or a
M5 x 30 (y) Bolt through the appropriate Lock Washer (ee,ff), an M4/M5 Washer (dd), the Monitor Bracket (k,l), an M4/M5
Washer, a M4/M5 Spacer (ii) and into the TV as seen in Detailed View A of Diagram 10. If you determined that your TV
requires a Bolt with a M6 or M8 Diameter, thread a M6 x 35 (aa) or a M8 x 40 (cc) Bolt through the appropriate Lock Washer
(gg,hh), the Monitor Bracket, a M6/M8 Spacer (jj) and into the TV as seen in Detailed View B of Diagram 10. The Monitor
Brackets should be vertically as close to the center of the TV as possible. Lightly tighten knobs on the Monitor Brackets
once they are properly connected to the TV.
Diagram 10
knob
Recessed Area
Detailed View A
ii
Detailed View B
jj
Detailed View A
Detailed View B
dd
gg, hh
TV
ii dd
TV
jj
dd
ee, ff
w, y
TV
aa,cc
dd
ee, ff
w, y
aa, cc
gg, hh
Advertisement
