Additional Information; Warning Message; Replace The Lamp (Contact Your Runco Dealer) - Runco REFLECTION CL-510 Owner's Operating Manual

6. Additional Information

Warning Message

It is normal for lamp to be darker when this unit
has been used for a period of time.
" Lamp life is expired ! Please install new lamp. And
reset the lamp timer" message will be displayed for
30 seconds on the screen if the lamp has operated
for 950 hours.
" Please change the lamp, Lamp will exceed its
lifetime after (hours):" message will be displayed
on the screen for 30 seconds for each time turning
on, if the lamp has operated for 980 hours. And
the number will count down continuously.
"Please change the lamp !" message will display on
the screen all the time and the POWER LED will
blink in orange and green sequentially if the lamp
has operated for more than (1,000) hours.
The power will turn off automatically after 10
minutes.

Replace the Lamp (Contact your Runco Dealer)

1. Loosen the screw of
front lamp cover
3. Loosen the two
screws of lamp
module.
5. Insert the new lamp
module into this
projector
horizontally until it
is securely in place.
2. Take off the front lamp
cover.
1
4. Pull out the lamp
module horizontally.
6. Tighten the two screws
of lamp module.
Runco CL-510/ CL-510LT User's Manual
Lamp life is expired !
Please install new lamp
And reset the lamp timer
Please change the lamp !
Lamp will exceed its
lifetime after (hours):
Please change the lamp !
6. Additional Information
2
27