Common Fx Lfo - Korg Krome Operation Manual

Common FX LFO

Two Common FX LFOs are available for modulation
effects, such as choruses, filters, phasers, etc. Normally,
the phase of the LFOs of multiple modulation‐type
effects will not be synchronized even if you set them to
the identical Frequency, since the LFOs are being
generated independently.
However, if you select Common 1 or Common 2 for the
LFO Type parameter of a modulation‐type effect, the
effect will use the one of the common LFOs instead of
its own individual LFO. This allows you to use a single
Common FX LFO to control two or more modulation‐
type effects such as flanger, phaser, or auto‐pan with
the same phase. Since you can make independent
settings for LFO waveform and phase offset for each
effect, you are free to create complex combinations of
effects.
Common FX LFO
Common FX LFO1
Frequency[Hz]
Reset
Generate original LFO waveform
LFO Type = Common1
Stereo Flanger
Waveform = Triangle
Phase Offset = 0 [deg]
Stereo Phaser
Waveform = Sine
Phase Offset = 0 [deg]
Stereo Auto Pan
Waveform = Sine
Phase Offset = +90 [deg]
Dynamic modulation, Common FX LFO Common FX LFO
83