Table of Contents
Advertisement
April 1996
Appendix C: About SCSI connection
1.
Turn off all equipment before plugging or unplugging
equipment on the SCSI bus.
2.
Attach the SCSI cable and SCSI terminator.
NOTE: Some equipment is internally terminated. If you
have questions, refer to your equipment
documentation.
IMPORTANT: If you are using a MACINTOSH IIfx
computer, you must install a special
terminator provided by Apple Computer or
unpredictable results can occur.
3.
Turn on the printer and the computer.
4.
Set the SCSI device number using the printer's
display panel.
Refer to the KODAK XLS 8600 and XLS 8600 PS
Printer, User's Guide for instructions about setting
the SCSI device number. This number typically has
to be between 1 and 6. This is because the CPU is
commonly set as SCSI device 7 and internal hard
drives are almost always configured as device 0.
C-3
Advertisement
Table of Contents
