Table of Contents
Advertisement
Section II
Error Messages
Many of the error messages displayed by the Export
Module are self explanatory. The following list provides
additional information about some of the more frequently
encountered messages. If you do not find a displayed
error message in the list, refer to the Macintosh and/or
Photoshop documentation.
General Error Messages
The image is not in RGB Color or Grayscale Mode!
Convert to RGB Color or Grayscale in Photoshop
before printing (exporting).
You must change the color mode before the file can be
printed. Click on OK to close the error dialog and return
to Photoshop.
The file is too large for the XLS 8600 Printer!
Resize the image in Photoshop before printing.
The maximum size is 120 MB.
You must make the image smaller before the file can be
printed. This can be done by selecting the Image Size
command on the Image menu and entering a smaller
height or width. Click on OK to close the error dialog and
return to Photoshop.
The selected printer is not available!
Check connections and make sure the printer is
turned on, or select another printer.
This message appears when the printer is not connected
or is not turned on when the Print button is selected. Click
on OK to close the error dialog and return to the Print
dialog.
April 1996
II-23
Advertisement
Table of Contents
