Table of Contents
Advertisement
Appendix C: About SCSI connection
Computer Type
Any Macintosh except IIfx
Without an external disk drive
(or other peripheral)
With an external disk drive (or
other peripheral)
Macintosh IIfx
Without an external disk drive
(or other peripheral)
With an external disk drive (or
other peripheral)
C-2
Instructions for installation are included in the
Adaptec EZ-SCSI for DOS/Windows, User's Manual.
Make sure that you select the option Install ASPI For
Windows and follow the instructions on the screen
for that installation option.
Macintosh Systems
A SCSI terminator is included with the printer. You must
obtain the proper cabling required for your configuration
from your printer dealer or distributor.
Use the following table to determine what cable and
terminator you need.
Cable
25 pin-50 pin
50–pin submini
"D" to Centronics
"D" type
25 pin-50 pin
50 pin submini
"D" to Centronics
"D" type
To connect the XLS 8600/XLS 8600 PS Printer directly to
your MACINTOSH computer (or to daisy–chain the
printer with an external SCSI device), perform the
following steps. Refer to the KODAK XLS 8600 and XLS
8600 PS Printer, User's Guide for additional information.
Terminator
Not required
Terminator sup-
plied with printer
or standard
Macintosh ter-
minator
Not required
Special Apple
IIfx terminator
supplied with
Macintosh IIfx
April 1996
Advertisement
Table of Contents
