Table of Contents
Advertisement
Section I
I-2
Requirements for SCSI–connected Installations
•
An ADAPTEC SCSI host adapter board.
•
A SCSI cable. Refer to the section Connecting the
printer for more information
•
A SCSI terminator
Refer to Appendix C, About SCSI–connected
Installations, for more information.
Software Requirements
Your PC must be installed with:
•
MS-DOS version 5.0 or later, or any compatible
operating system that will run Microsoft Windows
•
Microsoft Windows 3.1
•
Adobe Photoshop, Version 2.5
Requirements for SCSI–connected Installations
•
ADAPTEC EZ–SCSI Software. This software is
commonly provided with ADAPTEC SCSI host
adapter boards when they are purchased. The
supplier of your board should be able to provide the
software if you do not have it, or you can purchase it
through Adaptec directly.
Installing the Software
This section describes how to install the software on your
PC.
1.
Turn on the PC and start Windows.
2.
Insert the XLS 8600/XLS 8600 PS Printer Export
Module disk in the disk drive.
April 1996
Advertisement
Table of Contents
