Copies - Kodak XLS 8600 User Manual

Export module for adobe photoshop software and macintosh computers; export module for adobe photoshop software and microsoft windows 3.1

Hide thumbs Also See for XLS 8600:

Table of Contents

Section I

I-8

Print —This list box allows you to specify the material on

which the job will be printed. Select "Paper" if you want to

print on paper. Select "Transparency" if you want to print

on transparency material. The default is "Paper."

NOTE: If the wrong material is loaded in the printer after

the job has been received and processed, the

printer will display a message requesting that the

correct media be loaded.

If Size is set to "9.5 x 14 in (241 x 358mm)",

"Transparency" will be grayed out and cannot be

selected, because transparency media is not

available in this size.

Use XtraLife —This check box allows you to specify that

prints should have XtraLife lamination applied, which

increases shelf life and protects prints from ﬁngerprints.

XtraLife ribbon must be loaded in the printer in order for

this option to work.

NOTE: If the Size list box is set to "8.5 x 14 in," "9.5 x 14

in (241 x 358mm)," or "210 x 358mm" and this

check box is selected, a media mismatch will

occur on the printer, since XtraLife ribbon is not

available for these sizes.

Copies

The Copies box allows you to specify the number of

times that you want the job to be printed. Up to 999

copies can be printed at a time. The default is "1."

April 1996

Table of Contents