Connecting The Antennas; Connecting To The Av Aux Jacks - Kenwood KRF-V5300D Instruction Manual

Connecting the antennas

The broadcast reception cannot be made unless the antennas are
connected. Connect the antennas correctly as instructed below.
AM loop antenna AM loop antenna
Place the supplied loop antenna as far as possible from the
receiver, TV set, speaker cords and power cord. Adjust the
direction for best reception.
œ Attach to the stand.
∑ Push the lever.
é Insert the antenna cord.
® Release the lever.
† Place the antenna and adjust the direction.
FM indoor antenna FM indoor antenna
The supplied indoor antenna is for temporary use only. For stable
signal reception we recommend using an outdoor antenna.
Disconnect the indoor antenna when you connect one outdoors.
œ Insert the antenna cord.
∑ Fix the antenna on the wall.
FM outdoor antenna FM outdoor antenna
Lead the 75Ω coaxial cable connected to the FM outdoor antenna
into the room and connect it to the FM 75Ω terminal.
AM
GND
Attach to
the stand
AM loop antenna
Use an antenna
adapter
(commercially
available)

Connecting to the AV AUX jacks

VIDEO
AUDIO OUT
VIDEO OUT
Camcorder, game player,
and etc.
(commercially available)
FM 75
FM indoor antenna
FM outdoor antenna
(commercially available)
L-AUDIO-R
English
15