How To Set A Medium / A Device - Kenwood DNX520VBT Instruction Manual

How to Set a Medium / a Device

7 Disc media
If a disc is already inserted, it is ejected by
pressing the [0] button.
7 iPod
Ferritic core
(Accessory of this unit)
KCA-iP240V
(Optional accessory)
KCA-iP240V (optional accessory) is required
to connect an iPod. When connecting, make
sure to attach the ferritic core supplied with
this unit to prevent electromagnetic noise
(page 11).
To disconnect the iPod, stop the playback
by touching the [38] button on the source
control screen, and then disconnect the iPod.
See <Source Control Screen> (page 30).
7 USB device
CA-U1EX (optional accessory) is required to
connect a USB device.
To disconnect the USB device, touch the [0]
button on the source control screen, and
then disconnect the USB device. See <Source
Control Screen> (page 23).
⁄
• The playback starts automatically after setting the media
or the device.
7 microSD card
This microSD card slot is used to upgrade the
Navigation System.
For how to upgrade the Navigation System,
refer to the instruction manual of the
navigation system.
Inserting the microSD card
Hold the microSD card with the label side
facing left and the notched section up, and
insert it into the slot until it clicks.
Removing the microSD card
Push the microSD card until it clicks and
then remove your finger from the card. The
card pops up so that you can pull it out
with your fingers.
Getting Started
CA-U1EX
(Optional accessory)
English 13