Usb/Sd; Connecting A Usb Device; Inserting The Sd - Kenwood DNX7190DABS Instruction Manual

USB/SD

USB/SD

Connecting a USB device

1
Connect the USB device with the USB
cable. (P.100)
2
Press the [HOME]/[ ] button.
3
Touch [
].
4
Touch [USB]. (P.16)
Ñ
Disconnect the USB device
1
Press the [HOME]/[ ] button.
2
Touch a source other than [USB].
3
Detach the USB device.
Ñ
Usable USB device
You can use a mass-storage-class USB device
with this unit.
The word "USB device" appearing in this manual
indicates a flash memory device.
● About the file system
The file system should be the one of the
following.
• FAT16 • FAT32
NOTE
• Install the USB device in the place where it will
not affect safe driving.
• You cannot connect a USB device via a USB hub
and Multi Card Reader.
• Take backups of the audio files used with this
unit. The files can be erased depending on the
operating conditions of the USB device.
We shall have no compensation for any damage
arising from any erased data.
42
• exFAT • NTFS

Inserting the SD

DNX9190DABS / DNX7190DABS
1
Press the [G] button.
2
Touch [OPEN] to the panel fully opens.
3
Insert the SD card into the slot until it
clicks.
4
Press the [G] button.
5
Press the [HOME] button.
6
Touch [
].
7
Touch [SD]. (P.16)
DNX5190DABS / DNR4190DABS /
DNX419DABS / DNR3190BTS
1
Insert the microSD card into the slot until
it clicks.
2
Press the [HOME]/[ ] button.
3
Touch [
].
4
Touch [SD]. (P.16)