Bluetooth Hands-Free/Audio Output Setup; Av Input Setup; [Av-In Setup] - Kenwood DNX520VBT Instruction Manual

Bluetooth Hands-Free/Audio Output
Setup
Selects speakers to output the sound of hands-
free phoning (such as phone call voice and
ringing tone).
1 Display the Bluetooth Setup screen
>
Touch [ ] [ ]
(page 57)
[Bluetooth HF/Audio] Sets the output
speakers. ( "Front Only")
"Front Only" : Outputs from the front speakers.
"All" : Outputs from all the speakers.
>
[Bluetooth SETUP].

AV Input Setup

You can set AV input parameters.
1 Display the AV-IN Setup screen
>
Touch [ [ [ [ [ ] [ [ ]
2 Set each item
[On Screen AV-IN] Sets an on-screen display
of the AV-IN playback screen. (
"Auto": Information is displayed for 5 seconds
when updated.
"Manual": Information is displayed when you
touch on the screen.
[iPod AV Interface Use] Sets the terminal to
which the iPod is connected to. (
[AV-IN1 Name], [AV-IN2 Name] Sets a name
to be displayed when you select a system that
is connected via the AV INPUT port.
( "VIDEO")
⁄
• [iPod AV Interface Use]
This item can be set when in STANDBY source and also
the iPod is unconnected.
• [AV-IN Name]
One AV-IN name is displayed when "iPod" is selected in
[iPod AV Interface Use] and two are displayed when not
selected.
>
[AV-IN SETUP]. (page 57)
"Auto")
"iPod")
English 69