Operating Your Radio - Dab - Roberts Elise Manual

Operating your radio - DAB

1. Carefully extend the telescopic aerial.
2. Press the On/Off button to switch on your radio. The mains indicator
will light and the display will show "Roberts digital radio" for a few
seconds.
3. If this is the fi rst time the radio is used a quick scan of UK Band III
DAB channels will be carried out. This is known as "Auto tune". The
display will show "Now tuning". If the radio has been used before the
last used station will be selected.
4. During Auto tune, the display will show "Scanning" and as each
group of stations is detected the station count will be updated. The
bottom line of the display shows a bar graph indicating progress of
the Auto tune.
5. When the Auto tune is completed the fi rst station (in numeric-alpha
order 0...9...A....Z) will be selected. The fi rst station in the list of stations
found will be played. The display will show the station name in the fi rst
line of the display and other information in the second line.
6. If the station list is still empty after the Auto tune your radio will display
"No Signal".
7. If no stations are found, "Station not available" will be displayed and
it may be necessary to relocate your radio to a position giving better
reception. You should then carry out an auto tune to fi nd stations as
described on page 9 (see Finding new stations on page 9).
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
2
6