Setting The Clock - Roberts R9943 Manual

Setting the clock

1. The clock will start running when the batteries are installed or when
the radio is connected to the mains supply. The display will show
0:00 .
2. Ensure that the radio switched off.
3. Press and hold down Time set button until the hours digits begin
to flash in the display.
4. Press the Tuning up/down buttons to set the required hour. The
clock uses the 24 hour system e.g. 2:00pm is shown as 14:00
5. Press the Time set button, the minute digits will flash in the display.
6. Press the Tuning up/down buttons to set the required minute.
7. Press the Time set button to complete time setting.
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
6