Setting The Alarm Time - Roberts R9939 Manual

Setting the alarm time

1. Ensure that you radio is switched off.
2. Press and release the Mode button. The current alarm time and a
flashing alarm symbol will appear in the display.
3. Press and hold down the Mode button until the alarm time flashes
in the display.
4. Set the hours using the Down button or turn Tuning Control to
the left
5. Set the minutes using the Up button or turn Tuning control to the
right.
6. Press the Mode button to store the alarm time.
Note: Setting the alarm time can only be carried out whilst display is
flashing (8 seconds).
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
1
2
3
4
5
4
6
5
8