Page 1
CR980 3 Band Dual Alarm Clock Radio Please read this manual before use...
Page 2
Controls 7. Battery compartment (on rear) 1. Function switch 8. Volume control 2. Alarm switch 9. Tuning control 3. Time/Alarm off button 10. Alarm button 4. Fast set button 11. Snooze button 5. Slow set button 6. Sleep button If you need any further advice, please call our Technical Helpline on 0181 758 0338 (Mon-Fri)
The correct style of plug to suit your household together with a correctly Aerials rated fuse should be fitted. The wire aerial located on the rear of the CR980 is for FM reception. The IF IN DOUBT - CONSULT A QUALIFIED ELECTRICIAN wire should be fully extended and positioned for optimum reception There is a built in ferrite aerial for MW and LW stations.
Page 5
To switch off the radio, set the Function switch to 'Off'. If the radio does not switch off this may be caused by inadvertent operation of the Sleep Your CR980 has both single or dual alarm functions and can be set to function. Press the Time/Alarm off button once to cancel the sleep operate at one of two preset times or both, as required.
Once the alarm time is set, move the Alarm switch to the 'AL1', 'AL2' or Your CR980 digital clock radio can be set to operate the radio and switch 'AL1+AL2' position. Set the Function switch to 'Alarm'. The AL1 or AL2 off automatically after a preset period, adjustable up to 59 minutes.
Page 7
59 minute Sleep timer Waveband coverage 88 - 108 MHz 150 - 260 kHz 540 - 1600 kHz Imported by:- ROBERTS RADIO LIMITED PO BOX 130 MEXBOROUGH SOUTH YORKSHIRE S64 8YT The Company reserves the right to amend the specification without notice.
Page 8
In the event that it is not possible to return the instrument to the Roberts dealer from whom it was purchased, please contact Roberts Radio Technical Services department at the address shown below before taking further action.
Need help?
Do you have a question about the CR980 and is the answer not in the manual?
Questions and answers