Buttonhole - JUKI HZL-G Series Service Manual

6-17 Buttonhole

Adjustment procedure
Lower the buttonholing lever to bring it in contact with the projecting part of the buttonholing foot.
In this state, loosen the screws and adjust the buttonholing switch so that its standby-side contact point is
placed at the center of the range of movement of the lever.
The stitches at the beginning of sewing must be hidden under the bartacking part and circular part.
The side stitches at the end of sewing must not overrun from the bartacks or the former must not be spaced
from the latter.
Center of the range of movement
– 29 –
Range of movement
Contact point on
the standby side