Step Pattern - JUKI IP-110 Instruction Manual

(4) Step pattern

The­constant-dimension­stitching­process­can­be­programmed­as­many­as­20­operation­steps.­The­sewing­
conditions­ including­ the­ number­ of­ stitches,­ needle­ bar­ to­ be­ stopped,­ up/down­ stop­ mode,­ automatic­
thread­trimming,­continuous­steps,­lifting/lowering­of­presser­foot­and­normal/reverse­feed­stitching­can­be­
separately specified for the respective operation steps.
Step 10
Step 9
Step 8
Step 7
Step 6
Press­ ­to­display­the­pattern­list­screen.
)­­ Press­switch­ 1 ­to­display­the­step­pattern­No.­selection­pop-up.
2)­­ When­ switches­ 2 ­ are­ pressed­ and­ step­ pattern­ No.­ is­ selected,­ the­ screen­ is­ automatically­ changed­
over­ to­ the­ step­ pattern­ setting­ screen­ to­ display­ the­ state­ of­ the­ pattern­ which­ has­ been­ already­
specified.
Step 1
Step 2
Step 3
Step 4
Step 5
1
2
–­50­–
Programming­ procedure­ is­ described­ below­ taking­
the pattern on the left side as an example.