Overlapped StTchNg Pattern - JUKI SC-922 Instruction Manual

(2) overlapped stitching pattern
Overlapped sttchng pattern can be programmed.
C
a
B
B
D
1
C
D
3 4
2
3) Change the number of stitches for the selected process by using
4) Press swtch 3 to confirm the change you have made.
(The sewing machine does not run unless the setting has been confirmed by pressing
(Caution) the overlapped stitching pattern is carried out under automatic operation mode. once the
pedal is depressed, the sewing machine will automatically perform sewing of the number of
overlapped stitches.
A : Number of sttches of normal sttchng settng
C
0 to 15 sttches
B : Number of sttches of reverse sttchng settng
0 to 15 sttches
C : Number of stitches of normal stitching setting
0 to 15 sttches
D : Number of times of repetition
0 to 9 tmes
(Caution) When process D is set to 5 times, the sewing is repeat-
ed as a / B / C / B / C.
A
B
5 6 7
– 19 –
[Setting procedure of the overlapped
stitching]
1) Effective/ineffective of the over-
lapped sttchng pattern can be
changed over by pressng
swtch 2 .
When the overlapped stitching pat-
tern is rendered effective, LED D
lghts up.
2) Select a process (A, B, C or D) the
number of sttches for whch s to be
changed by usng
The number which is flashing on and
off represents the process whch s
beng set.
swtch 5 and swtch 6 .
swtch 4 .
swtch 3 .)