JUKI SC-922 Instruction Manual page 9

[Connecting the connector for the operation panel]
!3
!2
[ Connection of the pedal of standing-work machine ]
!5
(Caution) Be sure to securely insert the respective connectors after checking the inserting directions
since all connectors have the inserting directions. (When using a type with lock, insert the con-
nectors until they go to the lock.) the sewing machine is not actuated unless the connectors
are inserted properly. In addition, not only the problem of error warning or the like occurs, but
also the sewing machine and the control box are damaged.
[How to bundle all cords]
!6
How to fix cable clip band
Panel
Pull
!4
5) The connector for the operaton panel s provded.
Payng attenton to the orentaton of the connec-
tor !2 , connect it to connector (CN38) !3 located
on the crcut board. After connectng, securely
lock the connector.
(Caution) Be sure to turn oFF the power before
connecting the connector.
6) To use the pedal unt wth the sewng machne
for standing work, insert PK70 connector !4 nto
connector !5 (CN39: 12P) on the PCB.
(Caution) Be sure to turn oFF the power before
connecting the connector.
7) After nsertng the connector, put all cords togeth-
er wth cable clp band !6 located on the sde of
the box.
(Caution) 1. Fix the cord clamp and the cable clip
band following the attaching proce-
dure.
2. When removing the connector, re-
move it from the wire saddle and
remove it while pressing the hook of
the cable clip band.
How to remove cable clip band
Panel
Push the
hook.
Push
– 7 –
P u s h i n g t h e
hook portion,
push the band
to remove it.