JUKI SC-922 Instruction Manual page 31

No Item
50 Pedal Type of pedal sensor s selected.
specification 0 : KFL
1 : PFL
Refer to
51 Compensation of Compensation of starting the solenoid for reverse feed stitching
solenod-on tmng when reverse feed sttchng at the start of sewng s performed.
of reverse feed
sttchng at the
start of sewng
52 Compensation of Compensation of releasing the solenoid for reverse feed stitch-
solenod-off tmng ng when reverse feed sttchng at the start of sewng s per-
of reverse feed formed.
sttchng at the
start of sewng
53 Compensation Compensation of releasing the solenoid for reverse feed stitch-
of solenod-off ng when reverse feed sttchng at the end of sewng s per-
tmng of reverse formed.
feed sttchng at
the end of sewng
55 Foot lft after Functon of lftng presser foot at the tme of (after) thread trmmng
thread trmmng 0 : Not provded wth the functon of automatc lftng of work-
1 : Provded wth the functon of lftng presser foot automat-
56 Reverse Functon of reverse revoluton to lft the needle at the tme of (af-
revoluton to lft ter) thread trmmng
the needle after 0 : Not provded wth the functon of reverse revoluton to lft
thread trmmng
1 : Provded wth the functon of reverse revoluton to lft the
58 Needle bar Needle bar home poston retanng functon
home poston 0 : Needle bar home poston retanng functon s dsabled
retanng 1 : Needle bar home poston retanng functon s enabled
functon
2 : Needle bar home poston retanng functon s enabled
3 : Needle bar home poston retanng functon s enabled
59 Functon of Auto/ Ths functon can specfy the sewng speed of reverse feed
Manual change-
sttchng at the start of sewng.
over of reverse
0 : The speed wll depend on the manual operaton by pedal, etc.
feed sttchng at
1 : The speed will depend on the specified reverse feed stitching speed (No. 8).
the start of sewng
60 Functon of stop Functon at the tme of completon of reverse feed sttchng at
mmedately after the start of sewng
reverse feed 0 : Not provded wth the functon of temporary stop of the
sttchng at the
start of sewng
1 : Provded wth the functon of temporary stop of the sew-
61 Needle bar home Sets the perod of tme n whch the needle bar s retaned at ts
poston retanng home poston after the sewng machne has stopped.
tme 0 : The functon s dsabled (the needle bar home poston
64 Change- Initial speed when starting condensation stitch or EBT
over speed of
condensaton
stitch or EBT (end
back tack)
70 Functon of soft- Presser foot s slowly lowered.
down of presser 0 : Presser foot s rapdly lowered.
foot
1 : Presser foot s slowly lowered.
71 Double reverse Effective/ineffective of double reverse feed stitching is changed
feed sttchng
over. (to be used only with CP-18)
functon
0 : Ineffectve
1 : Effective
72 Sewng Current limit at the startup of sewing machine is specified.
machne startup 0 : Normal (Current limit is applied during startup)
selectng
1 : Rapid (Current limit is not applied during startup)
functon
73 Retry functon Ths functon s used when needle cannot perce materals .
0 : Retry functon s not provded.
1 - 10 : Retry functon s provded.
74 With/without With/without thread trimmer for MF is selected.
thread trmmer 0 : Not provded wth the tread trmmer
*
for MF
1 : Provded wth the thread trmmer
* Do not change the set values with asterisk (*) mark as they are functions for maintenance. If the standard set value set at the
time of delivery is changed, it is in danger of causing the machine to be broken or the performance to be deteriorated.
If it is necessary to change the set value, please purchase the Engineer's Manual and follow the instructions.
Description
"#-10. Selection of the pedal specifications" p. 47.
clamp after thread trmmng
cally after thread trmmng
the needle after thread trmmng
needle after thread trmmng
(holdng force s weak.)
(holdng force s medum.)
(holdng force s strong.)
sewng machne at the tme of completon of reverse feed
sttchng at the start of sewng
ng machne at the tme of completon of reverse feed
sttchng at the start of sewng.
retanng functon s enabled at all tmes)
100 - 3000 ms
1: Needle-bar returnng force before operatng the
retry functon: 1 (small) - 10 (large)
Settng range
0/1
– 36 to 36
(10°)
– 36 to 36
(10°)
– 36 to 36
(10°)
0/1
0/1
0 to 3
0/1
0/1
0 : Disabled
100 to 3000
(ms)
0 to 250
(st/mn)
0/1
0/1
0/1
0 to 10
0/1
– 29 –
Indcaton of functon settng Ref. page
5 0 1
5 1 1 1
40
5 2 1 3
40
5 3 4
40
5 5 1
40
5 6 1
41
5 8 0
41
5 9 1
41
6 0 0
41
6 1 0
41
6 4 5 0
7 0 0
42
7 1 1
7 2 1
7 3 1
42
7 4 0