Janome Sewing Machine Instruction Book page 24

q
z
x
c
e
v
• Inserting the bobbin
z Place a bobbin in the bobbin holder with the thread
x Guide the thread into notch w on the front side of the
w
c Continue to draw the thread lightly until the thread
v Attach the hook cover plate. Check the threading by
1/8 3/8 5/8
10
r
18
q End of thread
w Notch
e Notch
r Threading diagram
running off counterclockwise.
bobbin holder. Draw the thread to the left, sliding it
between the tension spring blades.
slips into notch e. Pull out about 6˝ (15.0 cm) of
thread.
referring to the diagram r shown on the hook cover
plate.