To Snap On And Snap Off The Presser Foot; To Detach And Attach The Foot Holder - Janome Sewing Machine Instruction Book

q
w
q
w
e
r
e
q
10

To Snap On and Snap Off the Presser Foot

<To snap off:>
Turn the handwheel toward you to raise the needle to its
highest position.
Raise the presser foot.
Press the lever on the back of the foot holder.
The presser foot will drop off.
* When pressing the lever, the lever should be pushed
in the direction of the arrow.
Do not press it from the top.
<To snap on:>
Place the presser foot so the pin on the foot lies just
under the groove of the foot holder.
Lower the foot holder to lock the foot in place.
q Lever
w Pin
e Groove
* When changing the presser foot, turn off the power
switch.

To Detach and Attach the Foot Holder

<To detach:>
Raise the presser foot and loosen the setscrew by
turning it counterclockwise.
<To attach:>
Align the hole in the foot holder with the threaded hole in
the presser foot bar and fit the setscrew into the hole.
Tighten the setscrew by turning it clockwise.
q Setscrew
w Foot holder
e Hole
r Threaded hole