Rack Mounting; Q-See Product Warranty - Q-See H.264 NETWORK DVR User Manual

A.3 RACK MOUNTING
The QT446, QT4332, QT4532, QT518, QT5116 and QT536 all use 2U cases and include
brackets and screws allowing them to be secured in a standard server rack or server cabinet.
These DVRs are designed for horizontal mounting only.
The DVR must rest on a shelf sufficient to hold its weight. The included mounting brackets are
only intended to keep the system from shifting and they are not sufficient to suspend the DVR
alone. You will also need to provide bolts to attach the brackets to the rack.
Two mounting brackets and four screws
are contained in the accessory box that
accompanied your DVR. Some brackets will
have three holes but only two screws are
required to mount the bracket to the DVR.
The flanges to secure the DVR to the rack
should be towards the front.
The DVR must have sufficient support when
installed. The brackets are only to keep the
DVR from moving. Ensure that all four holes
on the two mounting brackets line up with
holes in the rack.
If you will have limited access to the back
of the DVR, it is best to make sure that all
camera and other cable connections on the
back of the DVR are secure before bolting
the brackets to the rack.
94

Q-SEE PRODUCT WARRANTY

Q-See is proud to back all of our products with a conditional service warranty covering all
hardware for 12 months from the date of purchase. Additionally, our products also come with
a free exchange policy that covers all manufacturing defects for one month from the date of
purchase. Permanent upgrading service is provided for the software.
Liability Exclusions:
Any product malfunction or abnormalities in operation or damage caused by the following
reasons are not within the free service scope of our company:
1. Equipment damage caused by improper operation.
2. Improper equipment operation environment and conditions (e.g., improper power,
extreme environmental temperatures, humidity, lightning and sudden surges of
electricity).
3. Damage caused by acts of nature (e.g., earthquake, fire, etc).
4. Equipment damage caused by the maintenance of personnel not authorized by Q-See.
5. Product sold over 12 months ago.
In order to fulfill the terms of your warranty, you must complete the registration process after
purchasing our product. To do this, simply fill out the User's Information Card on our website
at www.Q-See.com
95