Preparations; Loading Batteries Into The Remote Control - InFocus IN5122 Quick Start Manual

Preparations

Loading batteries into the remote control

Please insert batteries into the remote control before using it. If the remote
control starts to malfunction, try to replace the batteries. If you will not be using
the remote control for a long period of time, remove the batteries from the remote
control and store them in a safe place.
1.
Slide the battery cover to remove it.
2.
Align and insert the two AA batteries
according to their plus and minus
terminals as indicated in the remote
control.
3.
Replace the battery cover in the direction of the arrow and snap it back into
place.
WARNING ►Always handle the batteries with care and use them only as
directed. Improper use may result in battery explosion, cracking or leakage,
which could result in fire, injury and/or pollution of the surrounding environment.
• When replacing the batteries, replace both of the batteries with new batteries
of the same type. Do not use a new battery with a used battery.
• Be sure to use only the batteries specified. Do not use batteries of different
types at the same time. Do not mix a new battery with used one.
• Make sure the plus and minus terminals are correctly aligned when loading a battery.
• Keep batteries away from children and pets.
• Do not recharge, short circuit, solder or disassemble a battery.
• Do not place batteries in a fire or water. Keep batteries in a dark, cool and dry place.
• If you observe battery leakage, wipe out the leakage and then replace a battery.
If the leakage adheres to your body or clothes, rinse well with water
immediately.
• Obey local laws when disposing the battery.
1 2 3
5