Cisco Catalyst 3120 Software Manual page 993

Chapter 43 Configuring Web Cache Services By Using WCCP
Configuring WCCP
Switch(config-if)# ip address 175.20.50.40 255.255.255.0
Switch(config-if)# no shutdown
Switch(config-if)# ip wccp web-cache redirect in
Switch(config-if)# exit
Switch(config)# interface gigabitethernet1/0/6
Switch(config-if)# no switchport
Switch(config-if)# ip address 175.20.60.50 255.255.255.0
Switch(config-if)# no shutdown
Switch(config-if)# ip wccp web-cache redirect in
Switch(config-if)# exit
This example shows how to configure SVIs and how to enable the web cache service with a multicast
group list. VLAN 299 is created and configured with an IP address of 175.20.20.10. Gigabit Ethernet
port 1 is connected through the Internet to the web server and is configured as an access port in
VLAN 299. VLAN 300 is created and configured with an IP address of 172.20.10.30. Gigabit Ethernet
port 2 is connected to the application engine and is configured as an access port in VLAN 300.
VLAN 301 is created and configured with an IP address of 175.20.30.50. Fast Ethernet ports 3 to 6,
which are connected to the clients, are configured as access ports in VLAN 301. The switch redirects
packets received from the client interfaces to the application engine.
Switch# configure terminal
Switch(config)# ip wccp web-cache 80 group-list 15
Switch(config)# access-list 15 permit host 171.69.198.102
Switch(config)# access-list 15 permit host 171.69.198.104
Switch(config)# access-list 15 permit host 171.69.198.106
Switch(config)# vlan 299
Switch(config-vlan)# exit
Switch(config)# interface vlan 299
Switch(config-if)# ip address 175.20.20.10 255.255.255.0
Switch(config-if)# exit
Switch(config)# interface gigabitethernet1/0/1
Switch(config-if)# switchport mode access
Switch(config-if)# switchport access vlan 299
Switch(config)# vlan 300
Switch(config-vlan)# exit
Switch(config)# interface vlan 300
Switch(config-if)# ip address 172.20.10.30 255.255.255.0
Switch(config-if)# exit
Switch(config)# interface gigabitethernet1/0/2
Switch(config-if)# switchport mode access
Switch(config-if)# switchport access vlan 300
Switch(config-if)# exit
Switch(config)# vlan 301
Switch(config-vlan)# exit
Switch(config)# interface vlan 301
Switch(config-if)# ip address 175.20.30.20 255.255.255.0
Switch(config-if)# ip wccp web-cache redirect in
Switch(config-if)# exit
Switch(config)# interface range gigabitethernet1/0/3 - 6
Switch(config-if-range)# switchport mode access
Switch(config-if-range)# switchport access vlan 301
Switch(config-if-range)# exit
Cisco Catalyst Blade Switch 3120 for HP Software Configuration Guide
43-9
OL-12247-01