Table of Contents
Advertisement
4.
Remove the cables from the robotics controller (see
Figure 5
Removing cables from the robotics controller
Removing an existing interface card
If you are replacing a card that is already installed in the library, save the configuration settings using the
FTP user interface: ftp -> login -> bin -> get *.cfg <path><filename>.cfg. See
page 89.
To remove the interface card:
1.
From the back of the library, locate the card to be removed (see
2.
Using a #1 Phillips screwdriver, loosen the captive screw in each black ejector handle.
3.
Push the ejector handles outward, and pull the card out of the library.
Figure 6
Removing an interface card from the library
Figure
e1200-320 4Gb Fibre Channel Interface Card user and service guide
5).
"Using the FTP
Figure
6).
interface" on
15
Advertisement
Table of Contents
