Table of Contents
Advertisement
Operation indicators
The HP e1200-320 4Gb FC Interface Card has LED indicators for monitoring overall status as shown in
Figure
2.
Figure 2
Operation indictors
Table 3
Operation indicators
Number
Description
1
Power LED
2
Ethernet link indicator
3
Ethernet activity indicator
4
ACT (activity) /LNK (link) LED indicators for the Fibre Channel port
5
Activity indicators for the SCSI busses(1, 0)
6
Beacon indicator
The LED functionality of the interface card is detailed below:
•
Power and Fault (Pwr) – The bi-color LED is green when power is active, and is continuously
amber-colored when the interface card detects a fault condition.
•
Fibre Channel Act – When green, the right ACT indicator signifies a good Fibre Channel link.
•
Fibre Channel LNK – When green, the left LNK indicator signifies Fibre Channel port activity.
•
SCSI bus (0, 1) – When lit, these green indicators signify SCSI activity on the bus corresponding to the
number of the indicator.
•
Ethernet (10/100) – When lit, these green indicators signify Ethernet link status and activity.
•
Beacon – This blue indicator can blink or light continuously for unit identification.
10
Introduction
Advertisement
Table of Contents
