HP Data Protector A.06.11 Recovery Manual page 144

CAUTION:
Editing the registry incorrectly can result in failed disaster recovery.
Problem
Auto logon does not work
Action
Sometimes auto logon does not work and you have to manually log on using the
DRM$ADMIN account.
Problem
Computer stops responding
Action
Check if the CD/tape is readable. Do not reuse CD-RWs/tapes too many times.
Problem
Cannot create a CD ISO image for EADR of Microsoft Cluster Server
Action
The quorum disk has to be backed up in order to be able to create an CD ISO Image.
Problem
Volume is not re-mounted during phase 1
On some systems (depending on the disk controller and its configuration) a volume
(without a drive letter assigned) associated with a mount point on a different volume
may not be re-mounted properly during phase 1 of the disaster recovery. This may
occur if the volume containing the mount point is recreated or reformatted (for example
the System Volume with MiniOS), causing the operating system to boot in "Safe
Mode" and to miss the detection of the file system present on the original mount
point's target volume. Consequently, the disaster recovery module does not recognize
this volume and reports it as MISSING in the drecovery.ini file. The contents of
such a volume are intact, even if it is not recognized.
144 Troubleshooting disaster recovery