A Further Information; Move Kill Links On Hp-Ux 1 1.X; Windows Manual Disaster Recovery Preparation Template - HP Data Protector A.06.11 Recovery Manual

A Further information

Move kill links on HP-UX 1 1.x

Proceed as shown below on the system which you want to back up to move some
links:
# The system will go from "run-level" 4 to "run-level 1"
# retaining the inetd, networking, swagentd services up.
# The state is called "minimum activity" for backup
# purposes (needs networking).
# IMPORTANT: ensure the links are present in /sbin/rc1.d before
# moving and they do have this exact name. You have to
# rename them for the rc0.d directory. Put them BELOW the
# lowest (original "/sbin/rc0.dKxx") "K...-link" in rc0.d
# Move K430dce K500inetd K660net K900swagentd into ../rc0.d BELOW
# the lowest kill link!!!
# echo "may need to be modified for this system"
# exit 1
#
cd /sbin/rc1.d
mv K430dce../rc0.d/K109dce
mv K500inetd../rc0.d/K110inetd
mv K660net../rc0.d/K116net
mv K900swagentd ../rc0.d/K120swagentd
Windows manual disaster recovery preparation
template
The template on the next page can be used to prepare for Windows Assisted Manual
Disaster Recovery, as described in the
Client properties
Chapter 3
computer name
hostname
on page 41.
Disaster recovery guide 149