HP Data Protector A.06.11 Recovery Manual page 117

1. Copy the /opt/ignite/data/scripts/make_sys_image file from your
Ignite-UX Server into a temporary directory on the client system.
2. Run the following command on the client node to create a compressed image
of the client on another system: make_sys_image -ddirectory of the
archive-nname of the archive.gz -s IP address of the target
system
This command will create a gzipped file depot in the specified directory on the
system defined with the –d and -s options. Make sure that your HP-UX client
has granted a passwordless access to the target system (an entry in the .rhosts
file with the name of the client system on the target system) otherwise the
command will fail.
3. Add the target directory to the /etc/exports directory on the target system
and export the directory on the target server (exportfs –av).
4. On the Configuring Ignite-UX server, copy the archive template file core.cfg
to archive_name.cfg: cp /opt/ignite/data/examples/core.cfg
/var/opt/ignite/data/OS_Release/archive_name.cfg
Example
cp /opt/ignite/data/examples/core.cfg
/var/opt/ignite/data/Rel_B.11.11/archive_HPUX11_11_DP50_CL.cfg
5. Check and change the following parameters in the copied configuration file:
• In the sw_source section:
load_order = 0
source_format = archive
source_type="NET"
# change_media=FALSE
post_load_script = "/opt/ignite/data/scripts/os_arch_post_l"
post_config_script =
"/opt/ignite/data/scripts/os_arch_post_c"
nfs_source = "IP Target System:Full Path"
• In the matching OS archive section:
archive_path = "archive_name.gz
Disaster recovery guide 1 17