Map 0000: Start Map - McDATA Sphereon 4300 Installation And Service Manual

Event Codes versus Maintenance Action (Continued)
Table 3-3
Event
Code Explanation
583 Loss of signal or loss of synchronization.
584 Not operational primitive sequence received.
585 Primitive sequence timeout.
586 Invalid primitive sequence received for current link state.
810 High temperature warning (CTP thermal sensor).
811 Critically hot temperature warning (CTP thermal sensor).
812 CTP card shutdown due to thermal violations.
850 Switch shutdown due to CTP thermal violations.

MAP 0000: Start MAP

This MAP describes initial fault isolation beginning at the:
• Failed product.
• Browser-capable PC with Internet connectivity to the firmware-
resident Enterprise Fabric Connectivity Manager (EFCM) Basic
Edition interface.
• Product-attached open systems interconnection (OSI) host
console.
1
Prior to fault isolation, acquire:
• A system configuration drawing or planning worksheet that
includes the location of the product, management interface,
other McDATA products, and device connections.
• The internet protocol (IP) address, gateway address, and subnet
mask for the product reporting the problem.
• User IDs and passwords.
Continue to the next step.
Maintenence Analysis Procedures
Action
Go to MAP 0500.
Go to MAP 0500.
Go to MAP 0500.
Go to MAP 0500.
Go to MAP 0400.
Go to MAP 0400.
Go to MAP 0400.
Go to MAP 0400.
Maintenance Analysis Procedures
3-5