Installation Tasks
2
Enable or Disable
Host Control
McDATA Sphereon 4300 Fabric Switch Installation and Service Manual
2-18
Figure 2-9
CLI View
Perform this procedure to configure the open systems management
server and enable OSI host control of the product. Implementing and
enabling OSI host control requires installation of a SAN management
application on the OSI server. Applications include Veritas
SANPoint™ Control or Tivoli
host control:
1. Select OSMS from the Configure menu at any view. The OSMS
View displays
OSMS View
Figure 2-10
2. Perform one of the following:
• Click Enable to activate OSMS.
• Click Disable to deactivate OSMS.
®
®
NetView
(Figure
2-10).
®
. To enable or disable OSMS