Table of Contents
Advertisement
Event Code: 083
Message:
Port set to inactive state.
Severity:
Informational.
Explanation:
A hardware or software problem prevented the port from coming online and set the port to an inactive state. Refer
to event data for the inactive reason
Action:
Action depends on inactive reason specified.
Event Data:
The first byte of event data (byte 0) specifies the port number. The second byte (byte 1) specifies the inactive
reason code as follows:
2 = Feature key not enabled - The optional flexport PFE key is not enabled.
3 = Switch speed conflict - The port cannot operated at the configured product (backplane or CTP Card) speed.
4 = Optics speed conflict - The port transceiver does not support the configured port speed.
5 = No SBAR - A serial crossbar (SBAR) is not installed. Not applicable to 4000-series fabric switches.
6 = Port swap conflict - The port swap configuration is invalid.
Distribution:
Product
EFCM Basic
Event Log
Management Server
System
Event Log
Error LED
E-Mail
Call-Home
Sense Info
Event Code Tables
Host
Link Incident
Log
Event Code Tables
A-15
Advertisement
Table of Contents
