Electric Circuit Diagram - Haier HD80-01-U User Manual

18 MAINTENANCE

ELECTRIC CIRCUIT DIAGRAM

ELECTRIC CIRCUIT DIAGRAM
NTC1
NTC2
R1:
Heating1
R2: Heating2
L: Lamp
PCB1, PCB2:
Printed circuit board
BS PLUG SAFETY DETAILS (FOR U.K. USER)
This appliance must be earthed. As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured markings identifying the terminals
in your plug, proceed as follows: The green and yellow wire must be connected to the
terminal in the plug marked E or by the earth symbol
and yellow. The wire coloured blue must be connected to the terminal marked with
the letter N or coloured black. The wire coloured brown must be connected to the
terminal marked with the letter L or coloured red. If a 13 amp (BS 1363) plug is used,
T1: Thermal cut-out K1: Door switch
NTC1: Temperature sensor K2: Water level switch
NTC2: Temperature sensor H:
Humidity sensor
PS: Drainage pump
M: Motor
Green and
yellow (Earth)
or coloured green or green
Brown (Live)
N
Blue (Neutral)
E
Fuse
L
Cord grip
Haier Europe Trading S.r.l. Tel + 39 0332 24511
Via De Cristoforis 12 Fax +39 0332 245146
21100 Varese - Italy E-mail het.srl@haiereurope.com