Enclosure; Trailer; Weights & Dimensions; Warranty - Generac Power Systems Mobile Power MLG25 Specification

MLG25 Generac Specifications Continued:

ENCLOSURE


Generac Mobile Power decals

Steel, 14-gauge, sound attenuated enclosure
UV & fade resistant, high temperature cured, white polyester powder paint
o
Insulated and baffled
o
68 dB(A) at 23 feet – prime power
o

Fully lockable enclosure
 Stainless steel hinges, door latches and exterior hardware
 Emergency stop switch located on front panel
 License plate holder with light
 Multi-lingual operating/safety decals
 Document holder with operating manual including AC/DC wiring diagrams

TRAILER


DOT approved tail, side, brake, and directional lights
Recessed rear lights
o

Transportation tie downs

Safety chains with spring loaded safety hooks

Single wall polyethylene fenders

2" ball hitch

2200 lb. leaf spring axle

2000 lb. tongue jack with footplate

ST205/75R15 tubeless tires – 6 ply

48" track width
WEIGHTS & DIMENSIONS
 Dry weight: 1640 lbs (744 kg)

Operating weight: 2038 lbs (924 kg)

105 x 68 x 56 in
(2.67 x 1.73 x 1.42 m)

WARRANTY


Engine and generator covered under OEM warranty – consult factory for details

CERTIFICATIONS

 CSA certified
Manufactured by Magnum Power Products LLC., a wholly owned subsidiary of Generac Power Systems, Inc.
Phone: 800-926-9768 Fax: 920-361-2214 www.m-p-llc.com
Page 3 of 4
6/12