Printer Reset Conditions - Printek MtP Series Programmer's Manual

Printer Reset Conditions

The following list describes what conditions are assumed whenever the printer is powered on, the Setup Menus
are exited, or a reset escape sequence is received when the printer is operating in an emulation mode which
supports such a sequence.
This list includes all variables which may be modified by the user for all emulations even though some
emulations cannot modify all the variables shown. Refer to the appropriate section for the emulation being
used.
───────────────
Line Printer/Easy Print
Character Pitch/Font
Extended Character Set
Text in an Incomplete Line
Magnetic Card Reader
Variable Reset Condition
───────────────
Emulation According to Interface Setup
Line Printer Mode
According to Format Setup
International
Double High Off
Double Wide Off
Emphasized Off
Line Spacing According to Format Setup
Left Margin According to Format Setup
Right Margin According to Format Setup
Print Contrast According to Format Setup
Buffer Mode Disabled
Discarded
Input Buffer Cleared (unless reset from host)
Pending Read Canceled
49