Table of Contents
Advertisement
Printek Emulation
Example: The following escape sequence will print a bar code containing "123456" that is 10mm high
followed by human readable text.
Escape Sequence: ESC
Hexadecimal:
1B
Codabar Specifications
Description: Each symbol starts with Leading Quiet Zone, followed with Start Symbol, Data
Symbols, ending with Stop Symbol and Trailing Quiet Zone.
Character set: 0-9, $, -, :, /, ., + and the start/stop pairs of A/T, B/N, C/*, and D/E.
Elements per symbol: 7 (4 bars, 3 spaces)
Character density: 8.1 CPI
Bar width: 0.25mm
Example 1: The following escape sequence will print a bar code containing "123456", using the A/T start/stop
characters, and 20mm high followed by human readable text.
Escape Sequence: ESC
Hexadecimal:
1B
Example 2: The following escape sequence will print a bar code containing "123456", using the C/* start/stop
characters and 20mm high followed by human readable text.
Escape Sequence: ESC
Hexadecimal:
1B
Graphics
The printer uses a single line thermal print head with elements spaced at 0.125mm. The maximum number of
graphic data bytes allowed for each model printer is shown for each command. After each line of graphic data,
the paper is automatically advanced 0.125mm to position the paper for the next graphic line. To advance the
paper by additional graphic increments without printing, refer to "Variable Size Line Feed" on page 11.
8-Bit Graphics
This command may be used to print any graphics pattern. The height and width of the graphic image may be
specified as shown below. Each line must contain the same number of bytes (width).
The image will be printed starting from the left margin and up to the right margin. If the width specified will
not fit within the margins, the right side of the image will be truncated.
16
Z
3
6
80
5A
33
06
50
Z
5
8
160
5A
35
08
A0
Z
5
8
160
5A
35
08
A0
1
2
3
4
31
32
33
34
35
A
1
2
3
41
31
32
33
34
C
1
2
3
43
31
32
33
34
5
6
36
4
5
6
T
35
36
54
4
5
6
*
35
36
2A
ESC # h w data
Advertisement
Table of Contents
