Installing Wire Spool And Adjusting Hub Tension - Hobart Handler 125 Owner's Manual

5-5. Installing Wire Spool And Adjusting Hub Tension

Installing 8 in. (203 mm) Wire Spool
.
Only applies to units equipped with
optional hub kit.
Tools Needed:
OM-947 Page 16
Installing 4 in. (102 mm) Wire Spool
Adapter used with
8 in. (203 mm)
spool only.
Retaining ring used
with 8 in. (203 mm)
spool only.
1/2 in.
When a slight force is needed
to turn spool, tension is set.
When a slight force is needed
to turn spool, tension is set.
Ref. 802 971-C / 803 012 / 803 013 -B