Hobart Handler 125 Specifications

Handler
115V Wire Feed Welder
115 Volt
Includes:
Comfortable 8-ft. (2.4 m) H-9B gun
10-ft. (3 m) work cable with clamp
Sample spool of .030 in. (0.8 mm) self-shielding flux-cored wire
.030 in. (0.8 mm) contact tips
Spool shaft to accommodate 4 in. spools
(Optional hub kit available for 8 in. spools)
Power cord with plug
Weld set-up chart
Owner's manual with parts lists, installation, operation and
maintenance guidelines
Features
Broad output range of 30 – 125 A
Four output voltage settings with
wire feed speed tracking
Built-in contactor
Durable feed head with quick-release
drive roll tension lever
Dual-groove quick-change drive roll
Short circuit protection
Self-resetting thermal overload
Self-resetting motor protection
Upgradeable for welding with gas
Hobart's 5/3/1 Industrial Warranty

Specifications

(SUBJECT TO CHANGE WITHOUT NOTICE.)
Current
Rated Output Range
85 A, 17.5 VDC, 30 – 125 A
at 20% Duty Cycle
60 A, 20 VDC
at 20% Duty Cycle*
* CSA rating.
125
®
Benefits
Allows you to weld up to 3/16 in. steel with flux-cored wire.
Provides a broader operating window for each wire, with quick and easy adjustment for different thicknesses and joints.
Eases use and excellent safety feature which makes wire electrically "cold" until trigger is pulled.
Positive feed with adjustable tension plus easy accessibility to thread new wire.
Makes it easy to change from one wire size to another. One knurled groove for .030–.035 in. (0.8–0.9 mm) wire, and
one smooth groove for .023/.025 in. (0.6 mm) wire.
Protects unit against current overload.
Protects power transformer to ensure reliability.
Protects wire feed system from overload, no fuses to change or circuit breaker buttons to reset.
Easy-to-install MIG Conversion Kit available.
Five-year warranty on transformers, three years on electronics (drive motors, rectifiers) and one year on guns.
Max. Open- Wire Feed
Circuit Voltage Speed Range
26 V 0 – 415 IPM (0–11 MPM)
0 – 500 IPM (0–13 MPM)
at no load
T he Handler 125 is a rugged constant-voltage DC
MIG Ready
welder with built-in wire feeder, that operates
off 115-volt household current. It comes ready to
With Built-in Gas Valve
weld, without shielding gas, using .030 –.035 in.
(0.8 – 0.9 mm) self-shielding flux-cored wire.
This is a great unit for outdoor applications when
shielding gas could be blown away. Welds up to
3/16 in. steel with flux-cored wire.
This welder is equipped with a built-in gas valve,
and with the addition of a regulator and shielding
gas, you're ready to MIG weld with .023 –.030 in.
(0.6–0.8 mm) solid wire. Use C-25 gas (75% Argon/
25% CO
weld with less spatter. Use Tri-Mix gas and stainless
wire for welding on 16 –12 ga. stainless steel.
#500495
Applications:
Home, farm and ranch and light fabrication projects.
Mower Decks/Brackets
Fences/Gates
Kennels
Signs
Window Security Guards
Amps Input at Rated Output, 60 Hz, 1-Phase
115 V KVA KW
20 2.9 2.5
15* 2.2* 1.77*
*
Certified to both the Canadian and U.S. Standards for welding equipment.
) on 24 gauge – 1/8 in. steel for a cleaner
2
Grills/Smokers
Firewood Racks
Metal Furniture
Machinery and
Auto Repair, etc.
Dimensions
H: 16-7/8 in. (429 mm)
W: 9-7/8 in. (251 mm)
D: 12-1/8 in. (308 mm)
211764
June 2010
Net
Weight
50 lb
(22.7 kg)