Advanced Debugger Features - Fujitsu CREMSON MODULAR STARTERKIT User Manual

Table of Contents

4.2 Advanced debugger features

TOGGLE BREAKPOINT: Sets or deletes breakpoint at the current source line or :

To set or delete a breakpoint, click the circles at the beginning of a source-line.

indicates an active breakpoint. Hit "go"

breakpoints can be found under the "Debug – Breakpoint" menu. 255 Software-Breakpoints

(using TRAP replacement) are possible.

To set breakpoints at positions which are currently not visible (e.g. because the source-

window of that module is not open), you can also enter a symbolic label directly in the

"Breakpoint" menu. Example: Enter "main" in the address-field and confirm. The new

breakpoint will automatically be assigned to the address of the "main()"-function.

in red. Setup in context menu defines which Registers should be displayed.

WATCH WINDOW: Displays the current variables to „watch". Double-click on any

variable in your code then specify watch in context menu to add to watch window. All listed

variables in a watch window can be displayed in any number format. Use Edit to directly

change the contents.

MEMORY WINDOW: Displays memory areas in various formats defined by Setup

(context menu). Changing of address/data is possible when debugger is not executing.

Note : If you make changes to the ROM-area (800000..8FFFFF) it can affect the currently

loaded program !

The memory window can be very helpful to check the registers or the frame memory of the

connected graphic controller !

DISASSEMBLER: Disassembles the contents of the code memory beginning from

actual PC position and displays the result in a separate window. Individual

assembler-lines can be changed using the „inline assemble"-function.

Cremson Starterkit User Manual

Chapter 4 Details of the included Monitor-Debugger

- 18 -

to execute until this line. A list of all

Table of Contents