Jumper Settings; Clear Cmos - Jumper Jp1; Power On Circuit - Jumper Jp2; Boot Block - Jumper Jp3 - Fujitsu D1483 Tehnical Manual

Jumper Settings

1 = JP1 Clear CMOS
2 = JP2 Power on circuit

Clear CMOS - Jumper JP1

Normal CMOS setting (Default). CMOS will not be cleared (default entry).
1-2
2-3 CMOS settings are not cleared

Power On Circuit - Jumper JP2

The system is powered on by one of the following mechanisms: IPMI or South Bridge.
1-2 Power on by IPMI (Default).
Power on by South Bridge.
2-3

Boot Block - Jumper JP3

Normal (Default)
1-2
2-3 Boot Block
A26361-D1483-Z120-1-7619
3 = JP3 Boot block
Interfaces and connectors
1
2
3
English - 15